〖說明〗標準8段數碼管驅動程序不用使用者更改另外送多個時序函數，還有贈送按鍵掃描及兩鍵驅動程序,全中文提示使用更方便快捷 http://www.mcuzb.com 坐標網時時更新為您的工作帶來方便。
默認11.0592Mhz的晶振。
—————————————————————*/
#include <reg51.h>
/*--------------------------------------------
調用方式：自行I/O 口定義﹫2001/05/12
函數說明：私有函數，各接口定義
--------------------------------------------*/
sbit HD7279_CS=P1^4; // HD7279_CS--P1.4
sbit HD7279_CLK=P1^5; // HD7279_CLK-- P1.5
sbit HD7279_DATA=P1^6; // HD7279_DATA-- P1.2
sbit HD7279_KEY =P1^7; // HD7279_KEY-- P1.3
/*--------------------------------------------
調用方式： HD7279A 各指令定義﹫2001/05/12
函數說明：私有函數，接口定義
--------------------------------------------*
/#define HD7279_RESET 0xa4 //復位
#define HD7279_TEST 0xbf //測試
#define HD7279_RLC 0xa3 //循環左移
#define HD7279_RRC 0xa2 //循環右移
#define HD7279_RL 0xa1 //左移
#define HD7279_RR 0xa0 //右移
#define HD7279_DECODE0 0x80 //譯碼方式0
#define HD7279_DECODE1 0xc8 //譯碼方式1
#define HD7279_UNDECODE 0x90 //譯碼方式2: 不譯碼
#define HD7279_HIDE 0x98 //消隱
#define HD7279_FLASH 0x88 //閃爍
#define HD7279_SEGON 0xe0 //段亮
#define HD7279_SEGOFF 0xc0 //段滅
#define HD7279_READ 0x15 //讀
/*--------------------------------------------
調用方式： void HD7279_LongDelay(void) 等侍函數﹫2001/05/12
函數說明 私有函數，>500ms
--------------------------------------------*/
void HD7279_LongDelay(void)
{
unsigned char i;
for (i=0;i<6;i++);
}
/*--------------------------------------------
調用方式：void HD7279_ShortDelay(void) 等侍函數﹫2001/05/12
函數說明：私有函數，=500ms
--------------------------------------------*
/void HD7279_ShortDelay(void)
{;}
/*--------------------------------------------
調用方式：void Delay10ms(unsigned char time) 等侍函數﹫2001/05/12
函數說明：私有函數， 6M晶振
--------------------------------------------*/
void Delay10ms(unsigned char time)
{
unsigned char i;
unsigned int j;
for(i=0;i<time;i++)
{
for(j=0;j<931;j++)
{;}
}
}
/*--------------------------------------------
調用方式：void HD7279_ShortDelay(void) 函數﹫2001/05/12
函數說明：私有函數，送指令
--------------------------------------------*/
void HD7279_SendByte( unsigned char out_byte)
{
unsigned char i;
HD7279_CS=0;
HD7279_LongDelay();
for(i=0;i<8;i++)
{
if(out_byte&0x80) { HD7279_DATA=1; }
else { HD7279_DATA=0; }
HD7279_CLK=1;
HD7279_ShortDelay();
HD7279_CLK=0;
HD7279_ShortDelay();
out_byte=out_byte<<1;
}
HD7279_DATA=0;
}
/*--------------------------------------------
調用方式：void Write7279(unsigned char command, unsigned char dta) 函數﹫2001/05/12
函數說明：私有函數，寫函數
--------------------------------------------*/
void Write7279(unsigned char command, unsigned char dta)
{
HD7279_SendByte( command );
HD7279_SendByte( dta );
}
/*--------------------------------------------
調用方式：自定義函數﹫2001/05/12
函數說明：私有函數，自行定義
--------------------------------------------*/
#define RunKey 0xXX
#define StopKey 0xXX
/*--------------------------------------------
調用方式：unsigned char HD7279_ReceiveByte(void)函數﹫2001/05/12
函數說明：私有函數，接受一個BYTE函數
--------------------------------------------*/
unsigned char HD7279_ReceiveByte(void)
{
unsigned char i, in_byte;
HD7279_DATA=1;
HD7279_LongDelay();
for(i=0;i<8;i++)
{HD7279_CLK=1;
HD7279_ShortDelay();
in_byte=in_byte<<1;
if(HD7279_DATA) { in_byte=in_byte|0x01; }
HD7279_CLK=0;
HD7279_ShortDelay();
}
HD7279_DATA=0;
return (in_byte);
}
/*--------------------------------------------
調用方式：unsigned char HD7279_GetKey()函數﹫2001/05/12
函數說明：私有函數，讀鍵盤函數
--------------------------------------------*/
unsigned char HD7279_GetKey()
{
unsigned char key;
if(!HD7279_KEY)
{
HD7279_SendByte(HD7279_READ);
key=HD7279_ReceiveByte();
switch( key )
{case RunKey:
case StopKey:
while(!HD7279_KEY);
default: return(0xff);
}
}
return(0xff);
}
/*--------------------------------------------
調用方式：main()函數﹫2001/05/12
函數說明：私有函數，例函數
--------------------------------------------*/
main()
{HD7279_SendByte(0xa4);//復位
Write7279(0x80,0)//顯示‘0’
}
function ImgZoom(Id)//重新設置圖片大小 防止撐破表格
{
var w = $(Id).width;
var m = 488;
if(w < m)
{
return;
}
else
{
var h = $(Id).height;
$(Id).height = parseInt(h*m/w);
$(Id).width = m;
}
}
window.onload = function()
{
var Imgs = $("content").getElementsByTagName("img");
var i=0;
for(;i
| 
66821730(技術支持)
